Your submission was sent successfully! Close

You have successfully unsubscribed! Close

Thank you for signing up for our newsletter!
In these regular emails you will find the latest updates about Ubuntu and upcoming events where you can meet our team.Close

Domain Name Service (DNS)

Note:
This documentation has moved to a new home! Please update your bookmarks to the new URL for the up-to-date version of this page.

Domain Name Service (DNS) is an Internet service that maps IP addresses and fully qualified domain names (FQDN) to one another. In this way, DNS alleviates the need to remember IP addresses. Computers that run DNS are called name servers. Ubuntu ships with the Berkley Internet Naming Daemon (BIND), the most common program used for maintaining a name server on Linux.

Install DNS

At a terminal prompt, run the following command to install the bind9 package:

sudo apt install bind9

A useful package for testing and troubleshooting DNS issues is the dnsutils package. Very often these tools will be installed already, but to check and/or install dnsutils enter the following:

sudo apt install dnsutils

DNS configuration overview

There are many ways to configure BIND9. Some of the most common configurations include a caching nameserver, primary server, and secondary server.

  • When configured as a caching nameserver, BIND9 will find the answer to name queries and remember the answer when the domain is queried again.

  • As a primary server, BIND9 reads the data for a zone from a file on its host, and is authoritative for that zone.

  • As a secondary server, BIND9 gets the zone data from another nameserver that is authoritative for the zone.

Configuration files

The DNS configuration files are stored in the /etc/bind directory. The primary configuration file is /etc/bind/named.conf, which in the layout provided by the package just includes these files:

  • /etc/bind/named.conf.options: Global DNS options
  • /etc/bind/named.conf.local: For your zones
  • /etc/bind/named.conf.default-zones: Default zones such as localhost, its reverse, and the root hints

The root nameservers used to be described in the file /etc/bind/db.root. This is now provided instead by the /usr/share/dns/root.hints file shipped with the dns-root-data package, and is referenced in the named.conf.default-zones configuration file above.

It is possible to configure the same server to be a caching name server, primary, and secondary: it all depends on the zones it is serving. A server can be the Start of Authority (SOA) for one zone, while providing secondary service for another zone. All the while providing caching services for hosts on the local LAN.

Set up a caching nameserver

The default configuration acts as a caching server. Simply uncomment and edit /etc/bind/named.conf.options to set the IP addresses of your ISP’s DNS servers:

forwarders {
    1.2.3.4;
    5.6.7.8;
};

Note:
Replace 1.2.3.4 and 5.6.7.8 with the IP addresses of actual nameservers.

To enable the new configuration, restart the DNS server. From a terminal prompt, run:

sudo systemctl restart bind9.service

See dig for information on testing a caching DNS server.

Set up a primary server

In this section BIND9 will be configured as the primary server for the domain example.com. You can replace example.com with your FQDN (Fully Qualified Domain Name).

Forward zone file

To add a DNS zone to BIND9, turning BIND9 into a primary server, first edit /etc/bind/named.conf.local:

zone "example.com" {
    type master;
    file "/etc/bind/db.example.com";
};

Note:
If BIND will be receiving automatic updates to the file as with DDNS, then use /var/lib/bind/db.example.com rather than /etc/bind/db.example.com both here and in the copy command below.

Now use an existing zone file as a template to create the /etc/bind/db.example.com file:

sudo cp /etc/bind/db.local /etc/bind/db.example.com

Edit the new zone file /etc/bind/db.example.com and change localhost. to the FQDN of your server, including the additional . at the end. Change 127.0.0.1 to the nameserver’s IP address and root.localhost to a valid email address, but with a . instead of the usual @ symbol, again including the . at the end. Change the comment to indicate the domain that this file is for.

Create an A record for the base domain, example.com. Also, create an A record for ns.example.com, the name server in this example:

;
; BIND data file for example.com
;
$TTL    604800
@       IN      SOA     example.com. root.example.com. (
                              2         ; Serial
                         604800         ; Refresh
                          86400         ; Retry
                        2419200         ; Expire
                         604800 )       ; Negative Cache TTL

@       IN      NS      ns.example.com.
@       IN      A       192.168.1.10
@       IN      AAAA    ::1
ns      IN      A       192.168.1.10

You must increment the Serial Number every time you make changes to the zone file. If you make multiple changes before restarting BIND9, only increment Serial once.

Now, you can add DNS records to the bottom of the zone file. See Common Record Types for details.

Note:
Many admins like to use the “last edited” date as the Serial of a zone, such as 2020012100 which is yyyymmddss (where ss is the Serial Number)

Once you have made changes to the zone file, BIND9 needs to be restarted for the changes to take effect:

sudo systemctl restart bind9.service

Reverse zone file

Now that the zone is set up and resolving names to IP Addresses, a reverse zone needs to be added to allows DNS to resolve an address to a name.

Edit /etc/bind/named.conf.local and add the following:

zone "1.168.192.in-addr.arpa" {
    type master;
    file "/etc/bind/db.192";
};

Note:
Replace 1.168.192 with the first three octets of whatever network you are using. Also, name the zone file /etc/bind/db.192 appropriately. It should match the first octet of your network.

Now create the /etc/bind/db.192 file:

sudo cp /etc/bind/db.127 /etc/bind/db.192

Next edit /etc/bind/db.192, changing the same options as /etc/bind/db.example.com:

;
; BIND reverse data file for local 192.168.1.XXX net
;
$TTL    604800
@       IN      SOA     ns.example.com. root.example.com. (
                              2         ; Serial
                         604800         ; Refresh
                          86400         ; Retry
                        2419200         ; Expire
                         604800 )       ; Negative Cache TTL
;
@       IN      NS      ns.
10      IN      PTR     ns.example.com.

The Serial Number in the reverse zone needs to be incremented on each change as well. For each A record you configure in /etc/bind/db.example.com that is for a different address, you will need to create a PTR record in /etc/bind/db.192.

After creating the reverse zone file restart BIND9:

sudo systemctl restart bind9.service

Set up a secondary server

Once a primary server has been configured, a secondary server is highly recommended. This will maintain the availability of the domain if the primary becomes unavailable.

First, on the primary server, the zone transfer needs to be allowed. Add the allow-transfer option to the example Forward and Reverse zone definitions in /etc/bind/named.conf.local:

zone "example.com" {
    type master;
    file "/etc/bind/db.example.com";
    allow-transfer { 192.168.1.11; };
};
    
zone "1.168.192.in-addr.arpa" {
    type master;
    file "/etc/bind/db.192";
    allow-transfer { 192.168.1.11; };
};

Note:
Replace 192.168.1.11 with the IP address of your secondary nameserver.

Restart BIND9 on the primary server:

sudo systemctl restart bind9.service

Next, on the secondary server, install the bind9 package the same way as on the primary. Then edit the /etc/bind/named.conf.local and add the following declarations for the Forward and Reverse zones:

zone "example.com" {
    type secondary;
    file "db.example.com";
    masters { 192.168.1.10; };
};        
          
zone "1.168.192.in-addr.arpa" {
    type secondary;
    file "db.192";
    masters { 192.168.1.10; };
};

Once again, replace 192.168.1.10 with the IP address of your primary nameserver, then restart BIND9 on the secondary server:

sudo systemctl restart bind9.service

In /var/log/syslog you should see something similar to the following (some lines have been split to fit the format of this document):

client 192.168.1.10#39448: received notify for zone '1.168.192.in-addr.arpa'
zone 1.168.192.in-addr.arpa/IN: Transfer started.
transfer of '100.18.172.in-addr.arpa/IN' from 192.168.1.10#53:
 connected using 192.168.1.11#37531
zone 1.168.192.in-addr.arpa/IN: transferred serial 5
transfer of '100.18.172.in-addr.arpa/IN' from 192.168.1.10#53:
 Transfer completed: 1 messages, 
6 records, 212 bytes, 0.002 secs (106000 bytes/sec)
zone 1.168.192.in-addr.arpa/IN: sending notifies (serial 5)
    
client 192.168.1.10#20329: received notify for zone 'example.com'
zone example.com/IN: Transfer started.
transfer of 'example.com/IN' from 192.168.1.10#53: connected using 192.168.1.11#38577
zone example.com/IN: transferred serial 5
transfer of 'example.com/IN' from 192.168.1.10#53: Transfer completed: 1 messages, 
8 records, 225 bytes, 0.002 secs (112500 bytes/sec)

Note:
A zone is only transferred if the Serial Number on the primary is larger than the one on the secondary. If you want to have your primary DNS notify other secondary DNS servers of zone changes, you can add also-notify { ipaddress; }; to /etc/bind/named.conf.local as shown in the example below:

zone "example.com" {
    type master;
    file "/etc/bind/db.example.com";
    allow-transfer { 192.168.1.11; };
    also-notify { 192.168.1.11; }; 
};

zone "1.168.192.in-addr.arpa" {
    type master;
    file "/etc/bind/db.192";
    allow-transfer { 192.168.1.11; };
    also-notify { 192.168.1.11; }; 
};
    

Note:
The default directory for non-authoritative zone files is /var/cache/bind/. This directory is also configured in AppArmor to allow the named daemon to write to it. See this page for more information on AppArmor.

Testing your setup

resolv.conf

The first step in testing BIND9 is to add the nameserver’s IP address to a hosts resolver. The Primary nameserver should be configured as well as another host to double check things. Refer to DNS client configuration for details on adding nameserver addresses to your network clients. In the end your nameserver line in /etc/resolv.conf should be pointing at 127.0.0.53 and you should have a search parameter for your domain. Something like this:

nameserver  127.0.0.53
search example.com

To check which DNS server your local resolver is using, run:

resolvectl status

Note:
You should also add the IP address of the secondary nameserver to your client configuration in case the primary becomes unavailable.

dig

If you installed the dnsutils package you can test your setup using the DNS lookup utility dig:

After installing BIND9 use dig against the loopback interface to make sure it is listening on port 53. From a terminal prompt:

dig -x 127.0.0.1

You should see lines similar to the following in the command output:

;; Query time: 1 msec
;; SERVER: 192.168.1.10#53(192.168.1.10)

If you have configured BIND9 as a caching nameserver, “dig” an outside domain to check the query time:

dig ubuntu.com

Note the query time toward the end of the command output:

;; Query time: 49 msec

After a second dig there should be improvement:

;; Query time: 1 msec

ping

Now let’s demonstrate how applications make use of DNS to resolve a host name, by using the ping utility to send an ICMP echo request:

ping example.com

This tests if the nameserver can resolve the name ns.example.com to an IP address. The command output should resemble:

PING ns.example.com (192.168.1.10) 56(84) bytes of data.
64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.800 ms
64 bytes from 192.168.1.10: icmp_seq=2 ttl=64 time=0.813 ms

named-checkzone

A great way to test your zone files is by using the named-checkzone utility installed with the bind9 package. This utility allows you to make sure the configuration is correct before restarting BIND9 and making the changes live.

To test our example forward zone file, enter the following from a command prompt:

named-checkzone example.com /etc/bind/db.example.com

If everything is configured correctly you should see output similar to:

zone example.com/IN: loaded serial 6
OK

Similarly, to test the reverse zone file enter the following:

named-checkzone 1.168.192.in-addr.arpa /etc/bind/db.192

The output should be similar to:

zone 1.168.192.in-addr.arpa/IN: loaded serial 3
OK

Note:
The Serial Number of your zone file will probably be different.

Quick temporary query logging

With the rndc tool, you can quickly turn query logging on and off, without restarting the service or changing the configuration file.

To turn query logging on, run:

sudo rndc querylog on

Likewise, to turn it off, run:

sudo rndc querylog off

The logs will be sent to syslog and will show up in /var/log/syslog by default:

Jan 20 19:40:50 new-n1 named[816]: received control channel command 'querylog on'
Jan 20 19:40:50 new-n1 named[816]: query logging is now on
Jan 20 19:40:57 new-n1 named[816]: client @0x7f48ec101480 192.168.1.10#36139 (ubuntu.com): query: ubuntu.com IN A +E(0)K (192.168.1.10)

Note:
The amount of logs generated by enabling querylog could be huge!

Logging

BIND9 has a wide variety of logging configuration options available, but the two main ones are channel and category, which configure where logs go, and what information gets logged, respectively.

If no logging options are configured the default configuration is:

logging {
     category default { default_syslog; default_debug; };
     category unmatched { null; };
};

Let’s instead configure BIND9 to send debug messages related to DNS queries to a separate file.

We need to configure a channel to specify which file to send the messages to, and a category. In this example, the category will log all queries. Edit /etc/bind/named.conf.local and add the following:

logging {
    channel query.log {
        file "/var/log/named/query.log";
        severity debug 3;
    };
    category queries { query.log; };
};

Note:
The debug option can be set from 1 to 3. If a level isn’t specified, level 1 is the default.

Since the named daemon runs as the bind user, the /var/log/named directory must be created and the ownership changed:

sudo mkdir /var/log/named
sudo chown bind:bind /var/log/named

Now restart BIND9 for the changes to take effect:

sudo systemctl restart bind9.service

You should see the file /var/log/named/query.log fill with query information. This is a simple example of the BIND9 logging options. For coverage of advanced options see the “Further Reading” section at the bottom of this page.

Common record types

This section covers some of the most common DNS record types.

  • A record
    This record maps an IP address to a hostname.

    www      IN    A      192.168.1.12
    
  • CNAME record
    Used to create an alias to an existing A record. You cannot create a CNAME record pointing to another CNAME record.

    web     IN    CNAME  www
    
  • MX record
    Used to define where emails should be sent to. Must point to an A record, not a CNAME.

    @       IN    MX  1   mail.example.com.
    mail    IN    A       192.168.1.13
    
  • NS record
    Used to define which servers serve copies of a zone. It must point to an A record, not a CNAME. This is where primary and secondary servers are defined.

    @       IN    NS     ns.example.com.
    @       IN    NS     ns2.example.com.
    ns      IN    A      192.168.1.10
    ns2     IN    A      192.168.1.11
    

Further reading

This page was last modified a month ago. Help improve this document in the forum.